Palm Oil Processing Machines In Nigeria

When asked about Palm Oil Processing Machines in Nigeria, I can't help but feel nostalgic as memories of those old manual palm oil press comes to mind.

The vision of two people turning the corkscrew with sheer brute force alone, while palm oil slowly sips into a basin.

That was the late 1990's and Early 2000's, fast forward to today, where most people prefer simplicity and easy. You will find most of the palm oil processing machines are more mechanized requiring less labor.

From Ogun state all the way to Akwa Ibom, more and more palm oil mills are upgrading from the traditional means of processing palm oil to more modern approach.

Can you blame them, when the old palm oil processing machines involved a lot of back breaking work.

If you have ever been to a old palm oil mill, you will know that its no walk in the park.its tedious and labor intensive.

Definitely not for the faint of body.

Palm Oil Processing Machines

Its why most palm oil mills across Nigeria are upgrading to the more mechanized option of using a digester and an oil press, which is run by a diesel engine

Because of these upgrades, the milling process that use to be an extended family process involving 8-12 people, has now gone down to 5-7 people.

Although its less tedious, it still involves some backbreaking work.

Now that more and more companies are getting into the business of Palm Oil Processing Machines. Newer models of digester and oil press are coming on board to make the processing a lot more easier.

More importantly, less tedious

Palm Oil Processing Machines

So what are the cost implications.

Manual Palm Oil Processing Machines

Barrels N4,500- N6,000 per Barrel.
Manual oil press N70,000- 150,000
Labour per month: N5000-7000 X 7-10
Storage: Prices depends drums and output
Facility: Cost depends on location

Output Per day

From the video, you will be looking at a rough estimate of 1-3 drums a day, this will depend on the number of people you have manning the oil Press.

Digester and Palm Oil Process Machines

Barrels. N4,500- N6,000 per Barrel
Foreign 1TPD-5TPD Digester and Oil press/Expeller N1,000,000-N3,500,000
Local or Fair Used 1TPD-5TPD Digester and Oil Press/ Expeller N
Labour: N5000-7000 LPM(Labourer per month)X 4-6
Storage: Prices depends drums and output
Office Location: Cost depends on location

Output

 

 

In less than 15 minutes you have half a drum(100 litres) of palm oil, factor in the delay period to clean the digester.

A total of 20 minutes to mill 100 litres and 40 minutes for one 200 litres, at 8 hours a day, will give you 8 drums a day.

Conclusion

As you can see, its more efficient and effective to use a digester / palm oil press expeller to set up a mill.

These Palm oil processing machines have helped a lot of small scale business startups, in setting up palm oil mills quicker and easier.

There by increasing the availability of Palm Oil, even during the periods of scarity.

Are you looking at starting you own small scale palm oil mill?

Which option would you want to start with?

call-brian-today

Register for the Palm Oil and Palm Kernel Oil Exportation Training, before its too late

Click the Timer to find out more

26 Comments

  1. Honour on September 13, 2016 at 3:33 am

    How much does this digester in the second vid cost, and were can it be gotten from.
    Is there specific capacities, and the standard and brand of manufacturer, thanks

  2. Honour on September 13, 2016 at 3:42 am

    Hi Brian
    Pls I’ll appreciate it if u help me identity 10 top global and 10 top local leaders (both producers and refining) in each value chain ( CPO, CPKO, and kernel shaft) in the market. Thank you

  3. MIKE AKPAN on January 30, 2017 at 1:41 pm

    Please can you get back to me urgently on prices of your complete units for Digester & Palm Oil machines of about One drum red Palm Oil per 8 hr day? Locations of project to be Port Harcourt and other cities in South South.

  4. Habibat on March 2, 2017 at 4:37 pm

    Hello Brian,

    Please how much is the cost of the Local or Fair Used 1TPD-5TPD Digester and Oil Press/ Expeller as mentioned in the above article?

    • Brian Ahamefula on March 7, 2017 at 7:32 am

      Hello Habibatb

      Please check your mail.

    • Buchi on November 16, 2017 at 4:30 pm

      How much can i get this please?

      • Chijioke Ahamefula on December 1, 2017 at 3:42 pm

        Its starts from 400k, i will send you a mail with the contacts for whom you will get the the full prices

  5. leye on March 16, 2017 at 6:44 pm

    Hello Brian.

    Is it possible for me to get Palm kernel Nut Craker that Can crack palm kernel at the rate of 10 per hour. I would be so glad if you can advise on palm kernel cracking machine either foreign or local and their capacity of any one who recommend to me.

    Thanks

  6. leye on March 16, 2017 at 6:49 pm

    Hello Brian.

    Is it possible for me to get Palm kernel Nut Craker that Can crack palm kernel at the rate of 10 tonnes per hour. I would be so glad if you can advise on palm kernel cracking machine either foreign or local and their capacity of any one who recommend to me.
    Palm kernel cracking being used by a lot of palm oil manufacturers in nigeria.

    Thanks

  7. Paulo on April 4, 2017 at 10:31 pm

    Please, how much is the palm oil machine, and the palm cannel cracker?

  8. Isaac on June 11, 2017 at 9:57 pm

    How much does this digester in the second vid cost, and were can it be gotten from.
    Is there specific capacities, and the standard and brand of manufacturer, thanks

  9. Isaac on June 11, 2017 at 9:59 pm

    Please can you get back to me urgently on prices of your complete units for Digester & Palm Oil machines of about One drum red Palm Oil per 8 hr day? Locations of project to he Kwale, Delta State

    • Brian Ahamefula on June 15, 2017 at 3:51 pm

      Hi Isaac you should be looking to around 450 thousand.
      But bear in mind, though those locally fabricated ones are cheap. they are expensive to maintain

    • Brian Ahamefula on June 15, 2017 at 3:51 pm

      Hi Isaac you should be looking to around 450 thousand.
      But bear in mind, though those locally fabricated ones are cheap. they are expensive to maintain

  10. Uche Christopher on August 4, 2017 at 9:48 pm

    Please just as Isaac asked. where can i buy the digester and palm oil processing machine shown on the second video in Nigeria.

  11. Malz on August 13, 2017 at 6:58 pm

    Am new in this, my state has no palm oil mill. I want to start up one but don’t know to go about it…
    Can you pls help me an elaborate more on it..Thanks

  12. Olukunle Olumuyiwa on November 9, 2017 at 1:26 am

    Pls how can I get this modern oil mill equipment particularly the portable one the picture is shown above. Also include price

  13. Ezekiel on December 30, 2017 at 5:28 am

    What are the machine required to start an oil palm business and how much is each of them?

    You can send it to my mail at cargomajestic@gmail.com. Thanks

  14. JOEL on February 2, 2018 at 3:24 pm

    PLEASE I AM LOOKING FOR COMPANIES IN NIGERIA THAT DEAL ON PALM OIL PROCESSING MACHINE.

  15. Mr, Mike Noble on February 3, 2018 at 11:15 pm

    Pls sir, just want to know the price of this digester, mills & machine of the oil business? Because l want to start the palm oil business.

  16. Fawole A.O on March 16, 2018 at 3:56 pm

    please can you advice on the size of oil processing machine to process yield from 9ACRES of palm trees .am just starting the business and will very well appreciate your advice .

Feel free to ask me any questions

Home| About Us| Store| Contact| Disclosure| Privacy| Terms and Conditions

Optimization WordPress Plugins & Solutions by W3 EDGE